Gutter Installation in Tomball, TX
Most gutter problems in Tomball are sizing problems, not installation problems. A five-inch trough that was fine on a small ranch house is not fine on a two-story roof with long runs and steep pitch. Water overshoots the front lip during heavy rain, lands at the foundation, and the clay soil does the rest. Gutter installation in Tomball, TX should start with a measurement, not a price per foot. We size the system to the roof, fabricate custom-fit gutters on site, and install them so they actually carry what your roof sends them.
Estimate Request
"*" indicates required fields
What Custom-Fit
Gutters Are
We roll-form gutter on site from a continuous coil, so your gutter comes off the machine in one piece for each run. That means no seams down the length of the gutter, and seams are where gutters leak. The only joints are at corners and end caps. Sizing and material follow the same standards we use across our gutter services. The two common residential sizes are five inch and six inch. Five inch handles most single-story roofs. Six inch moves substantially more water and pairs with three by four inch downspouts instead of two by three. On steep or large roofs, six inch is usually the right call in our rainfall. Material choice is typically aluminum for residential, in a range of baked-on colors. Heavier gauge holds its shape better over long runs and resists denting from ladders and debris.
Signs You Need New Gutters
These are the things we look for on a Tomball home. Water sheets over the front edge during ordinary rain, which almost always means the trough is undersized or the downspouts cannot keep up. Gutters sag or pull away from the fascia. There are visible seams that drip or have been repeatedly caulked. Rust, splits, or dents along the run. Peeling paint or soft wood on the fascia board behind the gutter, which means fascia and soffit repair comes before any new gutter goes up. Water pooling along the foundation or eroded soil at the drip line. Basement or slab moisture issues after storms. Mulch washing out of beds under the roofline. Foundation is the real concern here. Department of Energy building science guidance on gutters and downspouts notes that a few inches of rain on a house roof can produce several thousand gallons of runoff, and that keeping water away from the foundation matters especially in areas with expansive soils. Tomball sits on the same shrink-swell clay as the rest of this region.
Our Installation Process
We measure before we quote. We calculate the roof area draining to each run, look at pitch, and count how many downspouts the system needs and where they can go. Then we recommend a trough size rather than defaulting to five inch. Before installation we inspect the fascia board, because there is no point hanging new gutter on rotted wood. If the fascia needs repair, we address it first. On install day we form the gutter on site to the exact length of each run. We hang it with hidden hangers screwed into the rafter tails or fascia, spaced to handle load, and we set the pitch toward the downspouts so the trough drains completely. We install the downspouts and extend the discharge away from the foundation. That guidance calls for terminating downspouts at least five feet from the foundation, or ten feet into an underground catchment. Then we run water through the whole system and watch it drain before we pack up. We also set the downspout locations with you before we install. Placement affects both drainage and how the front of the house looks. It is easier to agree on that first.
Why Tomball Homeowners Choose STX
We are a roofing company that installs gutters, not a gutter company that works around roofs. That matters at the drip edge, where the roof and gutter meet and where most water intrusion at the fascia begins. Russell Mullin is a U.S. Air Force veteran and a former insurance adjuster, and his background shapes how we assess water damage. We are GAF Master Elite and CertainTeed ShingleMaster certified, carry an A+ BBB rating, and are bondable to $750,000. Gutter work carries a two-year warranty. If your property has heavy tree cover, we can also talk about gutter guards and leaf protection, though we will tell you when you do not need them. Our shop is in Huffman at 25419 FM 2100 Rd. Estimates are free except on real estate transaction inspections.
Serving Tomball and the Northwest Corridor
Tomball sits northwest of Houston, and we also serve Magnolia, Spring, Klein, The Woodlands, Waller, Cypress, and Hockley. Housing here ranges from older homes around Old Town Tomball to newer construction in the master-planned communities off 249 and 2920. The newer two-story homes are the ones most often under-guttered, because builders frequently spec five inch on roofs that need six. Mature lots closer to town have heavy oak and pine cover, which changes the conversation toward debris management. Tomball is outside our roughly twenty-five mile Huffman radius, so we schedule gutter work here rather than treating it as same-day service.
What Affects the Investment
Gutter pricing is driven by linear footage, trough size, downspout count, number of stories, and material gauge. Six inch costs more per foot than five inch and moves considerably more water, which is usually money well spent on a large or steep roof. Corners, end caps, and offsets add labor. Fascia repair, if needed, is a separate line item and we identify it before we start. We do not publish per-foot pricing because the right number depends on your roof, and a quote given over the phone without a measurement is a guess. We will put a full written scope in your hands. Financing is available on qualifying projects.
Frequently Asked Questions
Should I get five inch or six inch gutters?
It depends on how much roof drains to each run and how steep that roof is. Six inch with three by four downspouts moves substantially more water and is often the right answer on two-story homes in our rainfall. We size it from measurements.
What does custom-fit mean?
We form the gutter on site from a continuous coil, so each run is a single piece with no seams along its length. Seams are the most common leak point on a gutter, so eliminating them matters.
How many downspouts do I need?
That comes out of the drainage calculation rather than a rule of thumb. Long runs with only one downspout are one of the most common reasons a gutter overflows even when it is clean.
Can you install gutters on a house with damaged fascia?
We can, but we should not. Hanging new gutter on rotted fascia means the hangers have nothing to hold. We inspect the fascia first and repair it before installation.
How far should downspouts discharge from the house?
Department of Energy guidance calls for at least five feet from the foundation, or ten feet if you are running to an underground catchment. In clay soil that distance matters more than most homeowners expect.
Do you serve Tomball for emergency work?
Tomball is beyond our roughly twenty-five mile Huffman radius, so we schedule gutter projects there. For active roof leaks anywhere in our service area, we are available around the clock.
Ready to Get Started?
A gutter that is too small is the same as no gutter once the rain gets serious. Call STX Roofing at (281) 601-7663 or request a free roof inspection in Tomball. We will measure your roof, size the system properly, check your fascia, and quote custom-fit gutters in writing. Veteran-owned, GAF Master Elite, and based in Huffman.
